background image

REV B

2-2

121913

Safety and Instruction Decals

The decals are designed to give the operator brief informa-

tion needed in the daily operation and service of the mower. 
These decals are not intended to be used in place of this 
manual but instead are to be used as an extension of this 
manual. These decals should not be removed or obliterated. 
Replace these decals if they become unreadable.

It is the

 owner’s responsibility 

to make certain that the 

operators and mechanics read and understand this 
manual and all decals before operating this mower. 

It is also the

 owner’s responsibility

 to make certain that 

the operators and mechanics are qualified and physi-
cally able individuals, properly trained in the operation 
of this equipment. 

All operators and mechanics must become familiar 
with the safe operation of the equipment, operator 
controls and decals. 

Never let children or untrained people operate or ser-
vice the equipment. Local regulations may restrict the 
age of the operator.

The owner/user can prevent and is responsible for 
accidents or injuries occurring to themselves, other 
people or property.

The owner should also ensure that the operators/
mechanics know that they are responsible for their 
own safety as well as the safety of other persons 
within the vicinity. 

Remember,

 the operator is responsi-

ble for accidents or hazards occurring to other people 
or their property.

 

The following illustrations show the various safety decals 

that are located on the mower. A brief explanation, for those 
requiring one, is shown to help the operator understand the 
meanings of these decals.
     

 

 

Specific safety warning decals are located on the 
equipment near the immediate areas of potential 
hazards. These decals should not be removed or 
obliterated. Replace them if they become non-read-
able.

WARNING:

Thrown objects!

Part Number 601624

Never operate the mower deck with side 
deflector damaged, altered, removed or in 

raised position, except when the entire 

grass catcher attachment or mulching sys-

tem is being used.

WARNING

DANGER:

Rotating blades, pulleys & belts

Keep shields and covers in place 
while machine is in operation

Keep hands, feet and clothing 
away from rotating pulleys and 

belts.

Part Number 601837

Part Number 602758

Read the Operator’s Manual before 
attempting to operate this machine.

Wear ear protection, eye protection 
and safety shoes when operating 

this equipment.

Part Number 602757

DANGER:

Rotating impeller

Keep hands, feet and clothing away.

Keep shields or covers in place while the 
machine is in operation.

Stop the engine, remove the ignition key.

Engage the park brake.

Use a probe to clear debris from the 
blower assembly. Remove blower chute 

to clear debris from chute.

Never engage the mower deck unless the 
entire grass catcher attachment is prop-

erly installed.

Part Number 603940

WARNING:

Crushing body

Stay clear of the raised hopper door.

Never get between the hopper door and the 
hopper container.

Do not reach or climb into the hopper.

Never reach into the hopper door opening or 
the hopper door linkage area.

Part Number 603967

WARNING:

Crushing hand or foot

Never reach into the crushing danger zone.

Keep hands and feet away.

601837

602758

602757

603940

603967

Summary of Contents for diablo mp bac-vac


























































Reviews: