Remote Control
1.
Power
2.
Mute
3.
USB
4.
Line in
5.
FM
6.
Previous
7.
Play/pause
8.
Next
9.
Memory
10. Menu up
11. Menu down
12.
13. Bass+
14.
15. Treble-
16. Bass-
17. Volume-
Using the Remote Control the Battery
Pull the clear tab from the battery compartment at the base (straight) end of the remote.
If your remote becomes intermittent or you find you have to move nearer the unit to
operate, the battery probably needs to be replaced. To replace the battery, slide the
battery holder from the base of the remote control. Remove the battery and replace
with a 3Volt Lithium Cr2015 battery ensuring the +side is on the underside of the
holder as you slide it back into the compartment.
Setting up Your Tower
Carefully take the tower body and base out of the packaging.
1.
Take the screws and washers out.
2.
Attach the base to the body aligning the three holes
in the base with three holes in the tower.
3.
Screw the base into the body.
4.
Stand the tower upright on the floor. The appliance is now
ready for use.
Power
Place the unit in the desired position and unravel the mains cable. Insert the cable into the supply socket and
switch on if applicable.
