- EN 6 -
5.1 Storing a Station to Memory: Pre-Set Stations
• In radio mode, press & hold skip -/ + [11, 12] to search for the desired station.
• Press
Memory [10] to activate the memory function. The display will flash the station number
(i.e. P01 to P20).
• Press skip -/+ [11, 12] to select the desired station number (i.e. P01 to P20).
• Finally, press
Memory [10] to confirm and save the station number.
5.2 Returning to a Pre-Set Station
• In radio mode, press [13] to select the desired pre-set station number (ranging from P01 to P20.
The display will then show the station number (i.e. P01 to P20) and the FM frequency 3 seconds
after the station is selected.
5.3 Scanning
• In radio mode, press Scan [13] for 2 seconds to activate SCAN mode.
• The radio will automatically scan for frequencies and save the pre-set station to memory, with a total
of up to 20 different radio stations. This process may take 2-3 minutes to complete. Once SCAN is
done scanning and stops automatically, it will return to pre-set station no. P01. The display will show
the current time and FM frequency.
•
When the SCAN function is activated, the newly identified stations will replace the pre-set
stations that were previously stored in the memory.
•
When the power supply is reconnected and the unit does not contain backup batteries, the
unit will automatically scan for FM radio stations.
6. Volume Control
• When the radio is on, press Volume - /+ [6, 7] to decrease or increase the sound volume level.
•
The display will show the volume level, 00 ~ 15, from minimum to maximum sound level.
7. Sleep Mode Timer
• The radio will switch off after the selected time has elapsed. In Radio mode, press [8] to activate
sleep mode.
• The sleep mode timer will start to count down from the default 120 minutes. The user may select
other timer options: 120, 90, 60, 30, 15, 10, 05 & OFF. To cancel the sleep mode timer function,
press [8] & select OFF.
8. Replace Clock Back-Up Batteries
• Insert 2 AAA batteries. Check the polarity (+ and – at the ends of the battery) and follow the
instructions on the diagram near the battery compartment. Close the compartment door.
NOTE: Please be sure to properly dispose of batteries (see your local regulations).
9. Basic Specifications
Output:
0.5 W
FM range:
87.5 ~ 108 MHz
AC 100 - 240V ~ 50 / 60 Hz; AC adaptor provided
Battery:
2 X AAA UM4 (R6)