Page 1 of 2
SET UP INSTRUCTIONS 1/2
2. Locate the Bottom and Side Extrusions:
3. Locate the Top and Side Extrusions:
1. Attach Split Connectors to Side Extrusions:
a.
Remove the screw and insert split connector
into one end of the extrusion. Match like colored
numbers together. (e.g. 3 -3, 4 -4).
b.
Tighten screw to lock it into place. Remove
the remaining screw from the connector.
c.
Then slide the other extrusion onto split
connector. Make sure extrusions are flush
and tighten the screw to secure connection.
c.
Connect horizontal extrusion to
the bottom of a vertical extrusion,
screw facing inward.
d.
Connect bottom extrusions to-
gether and use
torx key
to tighten.
a.
See colored numbers on each
extrusion piece. Match like colored
numbers together. (e.g. 3 -3, 4 -4).
a.
See colored numbers on each
extrusion piece. Match like colored
numbers together. (e.g. 3 -3, 4 -4).
b.
End Lock is already attached to
opposite ends of extrusion.
c.
Connect horizontal extrusion
to the top of a vertical extrusion,
screw facing inward.
d.
Connect the top extrusions to-
gether and use
torx key
to tighten.
b.
End Lock is already attached to
opposite ends of extrusion.
a.
End Lock is already attached to opposite
ends of Support Strut.
b.
Align Support Struts within marked
lines, and insert End Lock into top and
bottom grooves of frame.
c.
Add a second support strut to align
marked lines and tighten screws with
torx
key
to secure connection.
4. Attach Support Strut to Frame:
RESORT EXTRUSIONS
BIG SKY TOWER 60D - 4FT X 14FT (BACKLIT)
PRODUCT CODE: BIGSKYT60D4X14-LLFRM
