PW15
Instruction manual
PW15 Infrared motion sensor
Movement will trigger the sensor, turning the output on.
PIR Sensors use a pyroelectric infrared device that senses the invisible heat radiated from
moving objects (people, animals, etc.).
SPECIFICATION:
Power Source: 220-240V/AC Detection Range: 180
°
Power Frequency: 50Hz Detection Distance: 12m max (<24
℃
)
Ambient Light: <3-2000LUX (adjustable) Working Temperature: -20~+40
℃
Time Delay: Min.10sec
±
3sec Working Humidity: <93%RH
Max.15min
±
2min Power Consumption: approx 0.5W
Rated Load: Max.1200W Installation Height: 1.8-2.5m
300W Detection Moving Speed: 0.6-1.5m/s
FUNCTION:
Lux control for day and night: The sensor can adjusted to work in different ambient light
levels .It can work in both the daytime and nighttime when adjusted to
the “moon” position.
It will only work when the ambient level is below approximately 3 LUX (min).
Time-Delay will only initiate and countdown when no motion is detected. Time will reset
when motion is detected.
Good sensitivity Poor sensitivity
INSTALLATION ADVICE:
As the detector responds to changes in temperature, avoid the following situations:
Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
Avoid mounting the detector near heat sources, such as heating vents, air conditioning
units, light etc.
