Failure to read and comply with all warnings, cautions, & instructions
prior to starting installation may cause personal injury and/or property
damage and will void warranty.
This device must be installed according to manufacturer’s instructions.,
and must be in agreement with all applicable local HVAC, plumbing,
drainage, and electrical codes.
Remove electric shock hazard - DISCONNECT THE POWER BEFORE
INSTALLING SWITCH to avoid electrical shock and/or equipment
damage. Do not use on circuits exceeding 24 volts to avoid damage to
switch, shock, or fire hazard. Switch must be connected to an isolated
transformer with a max rating of 30VAC, 8A, and 100VA.
In any installation where property damage may result from an
inoperative switch due to power outage, a back-up system(s) and/or
alarm should be installed.
The switch must only be installed by a licensed contractor or under the
direct supervision of the same. The condensation pan must be properly
maintained after installation and kept free from foreign objects, rust, or
other obstructions that might interfere with the proper operation of the
float switch.
WARNING WORK SAFE, READ THIS:
