
ADJUSTABLE SUPPORT BAR ASSEMBLY FOR CR4850-S
94
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This Instruction Manual complies with the Treestand Manufacturers Association’s
TMS 04 -
Standard Practice for Treestand Instructions
& TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems
ADJUSTABLE SUPPORT BAR
STEP 1.
Assemble
adjustable support bar
by
sliding
tree piece
into the
ladder piece
.
NOTE:
The
adjustable bolt cap
will be used to set the
desired length of the
adjustable support bar
.
STEP 2.
Attach
adjustable support bar
to ladder
using remaining bolts and wing nuts.
NOTE:
These figures relate to
Step 5
of the
Installation Instructions from page 90.
CONNECTING LADDER SECTIONS
WITH SAFETY SLEEVES
STEP 1.
Place the
Safety Sleeve
over the top of
the
middle ladder section
.
STEP 2.
Insert the
Middle Ladder section
into
the
Top Ladder Section
so that the
Safety Sleeve
is on the outside of both ladder pieces.
STEP 3.
Insert the
Snap Pin
through the
predrilled holes of the
Safety Sleeves
,
Top Ladder
Section
and
Middle Ladder Section
to connect
all pieces together.
NOTE:
Be sure that the
predrilled hole of the Safety Sleeve is assembled
to the top of the assembly.
Safety
Sleeve
Safety
Sleeve
Snap
Pin
Snap
Pin
Ladder
Section
Ladder
Section
Ladder
Section
Adjustable Support Bar
Tree Piece
Adjustable Support Bar
Ladder Piece
Adjustable
Bolt Cap
ADJUSTABLE SUPPORT BARS
STEP 1.
Assemble adjustable support bars by sliding
Part A
into the
Part B
.
NOTE:
The
snap pin
will be used to set the desired length of the adjustable support bars.
STEP 2.
Attach support bar to ladder using remaining bolts and wing nuts.
NOTE:
These figures relate to Step 5 of the Installation Instructions from page 90.
BgTLS0112Ar.QE_StandManual_1/06.QE 1/9/12 3:22 PM Page 94