4
3
4
Attach Door Panel
You will need:
Parts 6 & 11
8 x screws B (3.5 x 45mm)
2 x Handles F & 4 x Screws F (4 x 20mm)
Attach the front door panel (part 6)
to the frame from the outside using four
screws B. Using another two screws B fix
the bottom of the front door panel to
part 10 from the inside as illustrated.
Next, fix part 11 to both front panels from
the outside, using one screw B on each end.
Add Triangular Roof Panels
You will need:
Parts 8, 9, 12 (x2) & 13
7 x screws C (3.5 x 30mm)
8 screws D (3.5 x 20mm)
Secure the front triangular panel from the inside using two parts 12, one part 13 and seven screws C as shown in
the diagram below. Secure the back triangular panel from the outside using eight screws D.
5
Finally put the two handles on (parts
F)
either side of the door panel
using 4 x screws ‘F’ (4 x 20mm).
1
Build Bottom Frame
You will need:
Part 2 & 4 (2 x)
4 x screws B (3.5 x 45mm)
2
Build Top Frame
You will need:
Parts 1, 3 & 5
8 x screws B (3.5 x 45mm)
Now take part 3 and slot it onto the right
bottom panel (part 4). At the same time
slot part 1 onto the back panel (part 2) and
screw it into part 3 from the outside of the
playhouse using four screws B. Repeat this
step by screwing the left side of part 1 into
the left panel (part 5) using four screws B.
Ensure part 1 is
the right way up
as shown in the
diagram below.
3
Attach Window Panel
You will need:
Parts 7 & 10
6 x screws B (3.5 x 45mm)
Attach the window panel (part 7) to the frame using four
screws B. Then screw part 10 into part 7 from the inside
of the playhouse using two screws B as shown in the
smaller diagram here:
Please ensure part 10 is
attached from inside
the house
(screws on the inside).
Fix both side panels (parts 4) to
the back panel (part 2) using
four screws B as shown in the
diagram.
Make sure the long horizontal
rows of pre drilled holes are at
the bottom of the panels.