IMPORTANT NOTICE
Please avoid opening all drawers or doors simultaneously as this could cause your furniture to
fall forwards. Where there is a risk of this occurring, especially in environments with children
or uneven floors we recommend that this item of furniture is attached to your wall using
appropriate fixings (supplied).
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL
REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
.
Place fixing strip against the wall and mark position for drilling hole.
.
Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall
is soft and crumbly, we would advise you to use a 5mm drill bit for a tighter fit.
.
Insert plug into hole with end flush to the wall surface.
.
Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
.
Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit.
Attach the other end of fixing strip to the back edge of the furniture top using the 14mm
screw + washer and securely tighten.
