QUICK START GUIDE
2006 CHOPPER
GENERAL INFORMATION
COLD STARTING PROCEDURE
This motorcycle comes equipped with electronic
compression releases to aid in the starting of the engine.
Make certain the motorcycle is in neutral.
Turn fuel valve to the ON position.
Turn ignition switch to the ON position.
Depress handlebar ENGINE STOP switch to the RUN position. Note: The handlebar ENGINE
STOP switch defaults to OFF every time the ignition switch is turned on.
Prime the motor with two twists of the throttle.
Lift up on carburetor enrichener half way.
Depress start button for no more than five seconds at a time until the engine starts.
Keep the engine running at fast idle or 1500 RPM using the throttle.
Depress the enrichener back to the pre-start position when the engine has achieved
a constant and steady speed.
If the enrichener is left in the starting position, the spark plugs will foul, causing poor
engine performance and / or failed engine start.
Allow engine to warm approximately one to two minutes before riding.
IMPORTANT:
IF THE THROTTLE IS OPENED WHILE ENGAGING THE STARTER, COMPRESSION
WILL INCREASE DRAMATICALLY CAUSING THE STARTER TO KICK BACK, POSSIBLY PRODUCING
A STARTER FAILURE.
6
All manuals and user guides at all-guides.com
all-guides.com
