Remark
On the DMX 512 mode, the LASER display system will shut off if the
DMX 512 signal intermit.
ADDRESS SETTING:
DMX address setup
1. When the 10
th
code is ON, the function of 1-9 codes is the
following
The 1
st
code is OFF------Sound control mode (host LASER)
The 1
st
code is ON------AUTO play mode (host LASER)
The 2
nd
code is ON------ (passivity LASER)
Page 6
2. Be sure the power socket output voltage matches that off the
LASER display system.
3. Ensure the fan and the exhaust is not blocked.
4. The LASER display system should be statically fixed.
5. It is essential to be earthed well for the sake of safety.
Back panel
Key-press function instruction
1.
Fan
2.
DMX512 signal output socket
3.
DMX512 signal input socket
4.
Binary address switch
5.
Power socket
6.
Power switch
Page 3
218-255
Anticlockwise rotate (automatic)
10
Displa
y
mode
0-63
Normal display
64-127
Dot and line display
128-191
Subsection display
192-255
Dot Display
11 Wave
0-10
No wave
11-200
Wave frequency from low to high
201-255
Frequency and fixed extent from low
to high
12 color
0-31
Yellow
（
Red Green
）
32-63
Green
64-95
Red
96-127
Break off color separation
（
red and
green 2 colors
）
128-159
8 dots color separation
（
red, green and
yellow 3 colors
）
160-191
16 dots color separation
（
red, green
and yellow 3 colors
）
192-223
Red, green, yellow 3 color flows
224-255
Change color by sound
13
Gradu
ally-dr
aw
0-1
No gradually draw
2-150
Manual gradually draw
151-250
Gradually draw circularly
251-255
Sound control gradually draw
