Big Button BB20, Owner'S Manual

Page: 6 / 9

10 11
Code Identi  cation Feature
The Code Identi fi cation Feature allows you to
identify the 4 digit library code stored under
your device key. For example, if you want to
fi nd out what 4 digit code is stored under your
TV device key, follow the six steps below:
1. Press and hold both the MUTE and
POWER buttons at the same time until the
green indicator under a mode button stays
on, then release the
buttons.
2. Press and release the desired mode button
( TV or SAT/CBL ). The green indicator for
that mode blinks, then stays lit.
3. Press and hold both the MUTE and
POWER buttons at the same time for 1
second, then release the buttons. The green
indicator blinks off.
4. To fi nd the fi rst digit for the code stored
under the mode key pressed in step 2, press
each numeric key from
0-9 in turn. When
the green indicator blinks off the number
you pressed is the
fi rst digit for the code
you are searching for.
5. To fi nd the second digit, repeat step 4, this
time when the green indicator blinks off this
is the second digit.
6. Repeat step 4 to fi nd the third and fourth
digits.
Programming Combo Device Codes
Some Combo devices (e.g. TV/VCR, TV/DVD,
DVD/VCR, etc.) will require you to set up two
different Mode buttons to control both parts of the
Combo device. For example, if you have a TV/
DVD Combo, you might need to set up one code
under the
TV button to control the TV part AND
a separate code (under any other Mode button) to
control the DVD part.
Volume/Mute Control and Punch-Through
Feature
This remote lets you select which device Mode
controls your Volume/Mute buttons.
Any Mode chosen for Volume/Mute control
MUST have its own Volume/Mute function or
the Volume/Mute buttons will do nothing.
Setting ALL Volume/Mute Control to any one
Mode
This routine can set all Modes to “punch-through”
to any one chosen Mode for Volume/Mute button
control without the needing to change to that
Mode.
1. Press and hold both the MUTE and POWER
buttons at the same time until the green
indicator under a mode button stays on, then
release the
buttons.
2. Press and hold the MUTE button until the
green indicator blinks off, then release the
button.
3. Press and release the desired Mode button ( TV
or SAT/CBL ) for Volume/Mute control, the
green indicator for that mode blinks then stays
on.
Setup, cont.