9. See how the gear goes on first then the
diff slides in the housing. USE LOCK TIGHT!
10. Ready assembled differential
**See how the gear goes on first.
11. Hang up complete differential in
the chain
12.
Assemble
rear
axle
with
differential,
across steering wheels screw. At this point the wheels are
barley going to turn. The chain is very tight but dont worry! It
will loosen up after it has been ran 5-10 minutes.
13. Differential screws getting started...
14. Ready rear axle
15. Front shock absorbers disassemble
16. Piston rod with interpiece and
Plastic
part
with
screw
protection
mount. The part you need is screwed into the front shock
tower of the new kit
.
This piece makes the shock set up
higher to accomidate the front drive shafts...
Big Boys Toys and Hobbies
www.bigboystoysandhobbies.com
866-237-7366