D) ROUTE WIRE HARNESS AND PLUG THREE SPADE CONNECTORS TO SWITCH PER DIAGRAM: (GREEN=GROUND:
ORANGE=SUPPLY: BLUE=LEAD.)
E
)
CONNECT THE RING TERMINAL TO THE BATTERY GROUND AND SPLICE THE T-TAP INTO A KEYED POWER SOURCE AND
CONNECT THE MALE SPADE.
F) CONNECT THE REMAINING LEADS (2 BLACK, 1 RED, 1 BLUE, AND 1 GREEN) TO THE RELAY PROVIDED AS PER DIAGRAM.
17.
TEST LIGHTS FOR PROPER OPERATION AND ALIGNMENT, REALIGN LIGHTS IF NECESSARY (DO NOT REALIGN BY BENDING
MOUNTING PLATE (A)), BEFORE REINSTALLING ANY REMOVED SIDE COVERS, SEATS, ETC. SECURE RELAY TO KEEP FROM
BOUNCING.
18.
USE THE ADHESIVE WIRE HOLDER TO HOLD WIRE UNDERNEATH THE LIGHT BAR AND OUT OF SIGHT.
