BIG ASS FANS Haiku B3213-X4, Installation Manual

Page: 12 / 76

Universal Mount
10
REV. H | © 2018 BIG ASS FANS | ALL RIGHTS RESERVED
5
Install Mounting Ball
Slide the mounting ball over the extension tube (
Fig. 5.1
).
Insert the 6 mm steel pin into the hole at the top of the extension tube, and then slide the mounting ball upward, seating the steel pin in
the inner slots (
Fig. 5.2 ).
Insert the wedge into the mounting ball and secure it with the screw. Tighten the screw enough to prevent movement between the
mounting ball and extension tube, but do not over-tighten (
Fig. 5.3
).
Fig. 5.1 Fig. 5.2 Fig. 5.3
Extension Extension
Tube Tube
Mounting
Ball
6 mm Steel Pin
Screw
Wedge