BIG ASS FANS 400, Installation Manual

Page: 12 / 32

WWW.BIGASSFANS.COM © 2014 DELTA T CORP. ALL RIGHTS RESERVED
BIG ASS FAN 400
6
5.
&RQQHFWWKHVDIHW\FDEOHDQGJURXQGZLUH
Install the safety cable and ground wire lugs to the motor brackets with the (2) unpainted M4 x 6mm screws and lock washers. Plug the
wiring harness from the extension tube into the wiring harness from the fan.
Secure the wiring harness to the motor brackets with the provided zip tie. Make sure the wires are tightly secured against the motor
brackets so that the wiring cover seats properly.
6.
3UHSDUHWKHZLULQJFRYHUDQGFDQRS\
Slide the wiring cover downward, resting it on the fan hub. Make sure there are no wires visible between the cover and the fan hub.
Slide the canopy over the extension tube, temporarily resting it on the wiring cover.
Safety
Cable
Ground
Wire
Cable
Tie
:LULQJ
Cover
Canopy
Installation (cont.)