4 |
P a g e
HANGING THE FAN MOTOR ASSEMBLY
Lift the fan assembly onto mounting bracket. Fig. 4
Ensure the notch of the ball joint is positioned on the stopper of the mounting bracket to prevent the fan from
rotating when in operation. Fig. 5
Fig. 4 Fig. 5
PREPARE AND COMPLETE THE ELECTRICAL WIRING
— WIRING DIAGRAM (FIG. 6)
WARNING:
FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED
ELECTRICIAN.
NOTE:
AN ADDITIONAL ALL POLE DISCONNECTION SW ITCH MUST BE INCLUDED IN THE FIXED WIRING.
NOTE:
IF THERE ARE TWO OR MORE DC CEILING FANS INSTALLED IN THE ONE LOCATION, AN ISOLATION
SWITCH IS REQUIRED FOR EACH CEILING FAN. THIS IS REQUIRED W HEN PROGRAMMING THE REMOTE AND
RECEIVER TO PAIR TOGETHER.
Fig. 6
Stopper of bracket
Notch of ball joint
Mounting Bracket
120-110 VAC
SUPPLY
