background image

GB

9

Press dough evenly into the feed-
ing tube – the transport screw
pushes it through the design on the
pattern strip of the shortbread
cookie attachment 

.

After you have read all the instruc-
tions about the topic ”shortbread
cookie attachment“, you can use the
appliance as described under 6 a).

Warning: 

Never open the casing of the
motor block

– There are no operat-

ing parts to be found there. 

If the

casing is opened there exists the
possibility of a life-threatening
electric shock.

7. Troubleshooting

If the smooth running of the appliance

is hampered 

by excessive or stuck

food: 

Keep the 

REV  

key pressed. The

machine will now run in the reverse
direction. This will enable you to
dislodge the food, which has got
stuck, and the machine will once
again run smoothly.

If you do not succeed by doing so,
clean the machine as described
under 8.

If the 

motor stops suddenly,

it could

be due to the internal overload warn-
ing device, which automatically turns
off the machine when overloaded. This
is supposed to protect the motor.

Switch off the device and let it cool
down for approximately 15 minutes
before using it again.

In case this does not work, wait for
a further 15 minutes. 

If it still does not function at the
end of this period, 

this indicates a

technical problem

. In this case,

contact the service centre.

If the

mains cable 

is damaged or 

or

the accessories 

are visibly damaged:

Switch off the device by pressing
the 

OFF  

button! 

if this is not safely possible

unplug

the appliance.

Get the parts be repaired by cus-
tomer service, before reusing the
appliance again.

8. Cleaning

Pull out the plug from the socket,

before cleaning the appliance. 
In this way accidents caused by the
unexpected switching on of the
machine and electric shocks can be
prevented.

a) Cleaning the Motor block

Clean the external surfaces and

the power cord with a slightly
damp cloth. Always dry the device
well before using it again.

Warning: 

Never immerse the motor

block in water or any other liquid! 
Otherwise one could get a life
threatening electric shock, if mois-
ture, which has crept in, touches
the electrical wiring.

Summary of Contents for KH 3460













Reviews: