- 3 -
Commissioning
➩
Place the appliance on a non-slip and stable
surface.
➩
Insert the power plug into a wall power socket.
Inserting the film
➩
Open up the cover to the film compartment
e
and insert a roll of tube film.
➩
Pull a piece of the film out and close the cover
of the film compartment
e
.
Utilisation
Cutting the film
➩
Pull out as much film as is required for the moment.
➩
Slide the cutter
q
all the way to the left.
➩
Lay the pulled out film smoothly over the cover
to the film compartment
e
and pull the film to
the rear.
➩
Fixate the film above and below the cutter
q
with your fingers.
Note:
Press simultaneously on the two unlocking devices
left
a
and right
i
and open up the appliance cover
u
. In this way you can better fixate the film when
cutting.
Technical data
Mains voltage:
230-240 V ~ 50Hz
Power consumption : 150 W
Protection class:
II /
Recommended operating times:
Vacuuming:
15 Seconds
Sealing:
5 Seconds
After vacuuming and sealing allow a break of
80 seconds before continuing to seal further bags.
Description of the appliance
q
Cutter
w
Protection strip over the sealing wire
e
Cover - film compartment
r
Extractor supports
t
Sealing wire
y
Control lamp
u
Appliance cover
i
Unlocking device right
o
Button
a
Unlocking device left
s
Bag around the exhaust supports
d
Lug under the exhaust supports
f
Clip on the filter box
g
Seal on the filter box
h
Selector switch
j
Clip on the filter cover
k
Lock for exhaust supports
IB_KH1605_E2247_LB6.qxd 25.01.2008 11:05 Uhr Seite 3
