- 5 -
• Do not use any detergents, scouring
agents or solvents. They may damage
the components of the kettle.
To clean the inside of the water cooker,
the lid must be removed.
• To do this, move the left fastening
wing out of the stop and remove
the lid (see Fig. 1).
• To attach the lid, first place the right
fastening wing into the stop (see Fig. 2),
then press the left fastening wing in-
to the stop from above. The lid snaps
audibly into place.
If the kettle has calcium residues:
• Use a decalcifier from your household
goods shop that is suited for food
containers (such as a coffee machine
decalcifier).
• Use a suitable decalcifier for the
exterior aluminium surfaces.
Removing/inserting the spout screen:
• Remove the lid and ...
• just pull the spout sieve upwards.
• Clean the spout sieve with a slightly
damp absorbent cloth.
• After cleaning, you can insert
the sieve again and press down
firmly – and it's ready!
Storage
Let the kettle cool off completely before
you put it away.
• Wind the power cable around the
holder under the bottom of the base.
• Store the kettle in a dry place.
Disposal
Do not dispose of the device in
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your
communal waste disposal facility.
Observe the currently valid regulations.
In case of doubt, consult your waste
disposal facility.
Dispose of the packaging materi-
als in an environmentally respon-
sible manner.
Warranty & Service
The warranty conditions and service
address can be found in the enclosed
warranty slip.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
IB_KH1024_E191_UK_V1 07.03.2007 13:07 Uhr Seite 5