5. Insert the 3/8-16 x 3/4” hex screw (Fig. 3) through the
hole in the receiver and into the modified jackscrew.
Place the tail portion of the receiver flat against the
trunnion. Hand-tighten for further adjustment.
NOTE: You may need to machine the head of the jackscrew
(Fig. 4) if the jackscrew will not go far enough to allow the
spreader blade to align with the saw blade.
7. Insert the 1/4-20 x 1-3/4” carriage bolt (Fig. 5) through
the hole in the receiver and the hole in the trunnion.
Securely fasten with the 1/4” washer and locknut.
8. Use the provided hex wrench to replace the plate on the
receiver.
IMPORTANT: This splitter is designed to be used with the
basket-style over-arm blade guards. Always use your splitter
for through-cutting operations.
Fig. 3
Fig. 4
Fig. 5
