Setup
ONE
Unpack the monitor, camera, and power supply
TWO
Plug the camera in the “Camera Socket” at the left
side of the monitor.
THREE
Slot the camera into the holder at the top of the
monitor.
FOUR
Plug the power supply into a convenient mains
electricity wall socket.
FIVE
Insert the plug at the end of the cable into the
“DC IN”.
SIX
Slide the “Main Power Switch” on at the left side of
the monitor.
Use
Coil Cable
Retainer
Main Power Switch
Off
On
Power
indicator light
DC IN
Camera
Socket
Standby
On / Off
Brightness
Down / Up
Contrast
Down / Up
NOTE: Press the “Standby” button once and wait
2 ~ 3 seconds for the image to appear.
To change magnification or
focus, simply turn the white ring
on the camera clockwise or
anti-clockwise up to one full turn, as needed.
Variable
Magnification
Hold the camera off the page or at 45 degrees to
view more text or vertically for maximum
magnification.