Bierley
BM
‐
01
manual
‐
11
‐
Insert
Battery:
1) Slide the battery cover off.
2) Insert the battery, contacts facing down, fully into the battery bay.
3) Replace the battery cover.
5.2
Charging:
Always use the charge cradle and never attempt to connect the charge cord
directly to the handset. To setup the charge cradle ready for use.
1) First plug the charger into a working wall outlet (100v – 240v).
2) Connect the micro USB charger plug to the back of the charge cradle
then stand the mobile phone on the charge cradle and charging will
start automatically. The power supply and cradle should be left
connected. There is no need to switch them off or disconnect them at
any time.
Note
It is very important to not force the connector. If it doesn’t connect
smoothly and easily, something is wrong. Check orientation and angle
of insertion. The plug should be inserted square to the socket.
6 Basic Operation
6.1 Turn Your Device On / Off
Press and hold for about 3 seconds to turn the phone on / off.
If you turn the phone on without inserting a SIM card, the phone will
indicate “No SIM Card”.
After a SIM is inserted, the phone will check automatically whether the
card can be used or not.
The display will then show the following indication if the SIM can be used:
Enter Password -
If you have set Phone Lock. Default is 0000.
Enter PIN -
If you have set SIM Lock. If you do not know the PIN,
contact your service provider.
6.2 Making a Call
When a network operator’s name appears on the display, you can dial a
number. The signal strength indicator on the top left corner will show the
signal strength. (Five bars being the strongest signal).