Bierkühl Oy
+358 440 178 111
Pellonlaita 1, 50600 Mikkeli Finland
www.boscleantec.com
Operation and maintenance manual
BOS® Cleantec ventilation duct inspection
SIVU 7
OPERATING AND SAFETY INSTRUCTIONS
PLEASE CAREFULLY OBSERVE THE FOLLOWING BEFORE AND DURING OPERATION:
·
The machine user must ensure that the machine is fit for the intended purpose.
·
The user of the machine must ensure that the voltage and current correspond to the ratings
on the CE plate.
·
Occupational safety regulations must be observed.
·
Before shooting, make sure that there is no risk of explosion in the operating environment.
·
Flammable or explosive materials must not be stored or used in the place where the device
is used.
·
The machine must be protected from moisture, vibration and getting wet.
·
Only use spare parts that are suitable for the machine (approved by the manufacturer).
·
Do not cover the robot during operation.
·
The machine must keep as clean as possible.
·
The operating temperature must not 35ºC or fall below -0ºC
·
No changes may be made to the device.
·
Do not use damaged batteries. Damaged or modified batteries can behave unexpectedly and
cause a fire or explosion.
·
Do not expose the battery to fire or excessive temperatures.
·
Follow the download instructions.
·
Never make any service for damaged batteries. All battery maintenance must be performed
by the manufacturer or an authorized service center.
Person(s) working on site should wear a helmet, hearing and respiratory protection, goggles,
clothing and footwear, and other personal protective equipment depending on the work performed.
