Biene Electronics BR900-RF, Manual

Page: 7 / 8

AC Switch/Receiver initialization
Reset AC switch (reset all address)
Press button, keep > 7 sec and wait until red LED blinking.
After red LED blinking let go button and short press button.
Should be Relay switching.
Set AC Switch/Receiver 1 to address 1
Reset AC switch 1

2345A0 and wait answer SMS - if set auto mode, disable auto mode

2345R0 and wait answer SMS - reset all outputs

2345S1 and wait answer SMS - set outputs 1

press button on AC Switch/Receiver 1

Power OFF-ON on BR900-SMT-RF device

wait AC Switch/Receiver 1 Relay switching

Power OFF-ON on BR900-SMT-RF device

if AC Switch/Receiver 1 turned ON, then address installation OK

2345R0 and wait answer SMS - reset all outputs
Set AC Switch/Receiver 2 to address 2
Reset AC switch 2

2345A0 and wait answer SMS - if set auto mode, disable auto mode

2345R0 and wait answer SMS - reset all outputs

2345S2 and wait answer SMS - set outputs 2

press button on AC Switch/Receiver 2

Power OFF-ON on BR900-SMT-RF device

wait AC Switch/Receiver 2 Relay switching

Power OFF-ON on BR900-SMT-RF device

if AC Switch/Receiver 2 turned ON, then address installation OK

2345R0 and wait answer SMS - reset all outputs
Set AC Switch/Receiver 3 to address 3
Reset AC switch 3

2345A0 and wait answer SMS - if set auto mode, disable auto mode

2345R0 and wait answer SMS - reset all outputs

2345S3 and wait answer SMS - set outputs 3

press button on AC Switch/Receiver 3

Power OFF-ON on BR900-SMT-RF device

wait AC Switch/Receiver 3 Relay switching

Power OFF-ON on BR900-SMT-RF device

if AC Switch/Receiver 3 turned ON, then address installation OK

2345R0 and wait answer SMS - reset all outputs