18
If the spray can is loose vertically even when the lock lever is properly
raised, or if the lock lever cannot be raised, you need to remove the
spray can and adjust the height of the spray stand.
To adjust the height, rotate the adjusting screw located in the center of
the spray stand with a hex wrench.
1. Turn the lock lever down in clockwise direction.
2. Check that the lock lever is horizontal, and then remove the spray
can.
* If the spray can is still connected to the inlet port, pull the can straight down.
6.2.3 Spray Stand Adjustment
Hex Wrench
Lock Lever
Adjusting Screw
Hex Wrench
Spray Stand
Raise
Lower
█
Removing
