Bieffe JOLLY BF091, Use And Maintenance Manual

Page: 35 / 48

35
ASSE NELLA MANICA and JOLLY IRONING BOARD
ENGLISH
8. INSTALLATION AND USE BF091/BF291
8.1 INSTALLATION
ATTENTION: read and follow carefully all the safety instructions previusly reported, pay at -
tention to the instructions about the electrical system to which the appliance is connected.
1.
Open the ironing board and position the adjustable leg (1) according to the required height.
Place the board on a flat and stable floor.
2.
Use the support (2) for a steam generator or clothes.
3.
When present, install the option sleeve board. In case of a heated sleeve board, connect the
plug to the outlet onto the ironin board.
4.
Connect the power cable (3) to an outlet.
5.
Activate the main switch (4).
8.2 USE
ATTENTION: ENSURE THAT THE ELECTRICAL SYSTEM IS EQUIPPED WITH A DIFFERENTIAL SWI-
TCH (LIFE-SAVING SYSTEM) AND WITH A PROTECTIVE CONDUCTOR (GROUNDING SYSTEM).
1.
Set the thermostat (5) as needed (the ideal temperature 50/70 °C).
2.
Wait 10 minutes to reach the selected temperature.
3.
Press the pedal (6) to vacuum.
4.
To avoid condensation inside the table, only iron when the ironing board is hot and act on
the vacuum pedal each time steam is used. THE MODEL JOLLY COD. BF291 is equipped with
a second pedal to control a blowing motor. Press on the pedal to blow. Blowing helps to bet -
ter iron velvet and particularly wool, works as anti-shininig and refresh fibers. The blowing
system gives back softness and strenght to fabrics.
5.
Do not leave temperature sensitive objects on the board. Do not place heavy clothings on
the support (8).
At the end of the job, turn off all the switches and unplug the machine from the outlet. It is not necessary to
empty the boiler. Empty the boiler at least once a month.