B
8
Manual model IndAC
2
Installation
2.1
Safety instructions
w
Warning:
Installation works may be performed by
qualified technical staff only.
Do not perform any connection work
unless you are qualified to work with
400V three-phase current.
Before opening the unit, follow the safety
instructions in section 1.5.
2.2
Delivery check
-
On delivery, check the unit and its pack-
aging. Report any transit damage imme-
diately to the driver and supplier.
-
Make sure that all parts have been sup-
plied (see section 1.4). Report any de-
fects to the supplier immediately.
2.3
General instructions
2.3.1
Order of working
Biddle recommends following the order of
working described in this section for perform-
ing the installation works.
n
Note:
Make sure you perform all operations that
are required for the installation of your unit.
Check the type plate and refer to section
1.3.5 if you are not sure about the model or
type of your unit.
2.3.2
Miscellaneous
c
Caution:
The infiltration of coarse dust, cement, etc.
may damage the unit. So long as such con-
taminants are in the room,
-
do not put the unit into operation;
-
cover the intake and discharge openings.
The packaging, for example, can be used for
this.
2.4
Suspending units
horizontally
Only with installation position type 0
Example of a horizontal installation
2.4.1
Method of suspension
This manual assumes suspension from an
auxiliary structure, consisting of two horizon-
tal beams positioned above the door.
