DF M
ANUAL
I
NSTALLATION
Manual version 3.0 (21-11-2017)
en-25
en
4. Secure the cable in a tension-free state.
The cable should protrude by approx. 9 cm.
5.
Optional:
Set the dip switches on the front plate.
6. Attach the control cable’s connector to the PCB.
7. Replace the front plate onto the rear plate.
See also:
2.6.2 "Control panel settings" on page 20
6.4
"Biddle control cable composition" on page 42
2.6.7 Connecting the control to the unit
The control panel is connected to one of the two modular
connectors on the unit (indicated by the symbols
E
and
H
).
Both sockets are identical.
