Steps to charge the battery
1) Confirm that the local power supply corresponds with the requirement of the charger.
The input voltage is between 100V-240V.
2) The battery can be charged on the e-bike or removed from the e-bike and charged
separately.
3) Connect the charger plug and charging port of the battery first and then connect the
power plug and the power source.
4) When the red light turns on, the charging starts.
Safe charging
Taking care of the battery is vital to ensure your safety
and to maximize its long term performance. Battery fault,
fire or explosion hazards will occur if the instructions are
not followed:
Ensure that the charger plugs are dry
and securely connected to the charger port of the
battery case.
Do not cover the battery or charger while charging. Do not use
the battery charger near flammable products or in unventilated
places. The ambient temperature should not exceed 40°C.
Keep the battery away from water to prevent shocks or shorting.
Only use the charger provided to charge the battery.
Do not disassemble or modify the battery.
Do not expose the battery to fire or extreme temperatures.
Do not allow impact or force against the battery pack.
Pull out the power plug first and then the charger plug after charging. Connecting the
power plug and the power source for a long time while not charging is not recommended.
If any abnormal conditions occur, like overheating or strange smells, stop charging
immediately and contact your authorized dealer for help.
Keep the charger in a safe place and away from children.
Regular use - if you are commuting significant distances, it is advisable to recharge the
battery before the return journey.
Occasional use - Recharge the battery at least once a week, even if the e-bike is not
used.
Always recharge the battery after use.
The manufacturer will not be responsible for any damage or injury due to
improper or unsafe use of the battery charger
LED Indication
1) LED (GREEN) - Power on, when not connected to the batteries.
2) LED (RED) - Charging
3) LED (GREEN) - Fully charged, when connected to the batteries
Power Plug Charge Plug
