Hookup
Two basic connection options
IMPORTANT: Make certain all stereo
system components including the
Power Point subwoofer are turned OFF
before proceeding.
1. Amplifier/speaker level hookup
If you own a receiver or integrated
6
amplifer that does NOT have a line level
subwoofer output or preamp output,
refer to Figure 3 for proper connection.
To determine if your equipment has a
subwoofer output, look on the back of
the receiver for a female RCA type jack
labeled “subwoofer out,” “sub out” etc.
If your receiver does have a subwoofer
output go to hookup 2 below.
2. Line level (subwoofer) hookup
If your receiver or integrated amplifier
DOES have a subwoofer output, refer to
Figure 4 for proper connection. This
hookup method will require a long
(depending on the location of your
receiver and subwoofer) male RCA to
RCA line level cable to connect the
subwoofer. The satellites connect to
the receiver as shown.
Figure 4 - Line Level Hookup
RCA LINE
CORD
SUBWOOFER
SUB OUT
