1. Full charge the machine before storage.
2. Switch off all power buttons before storage.
3. If there is dirt, soak and wring the cloth dry to wipe it clean.
4. Please do not use gasoline, volatile oil, thinner, kerosene, etc.
which could dissolve the resin of the surface.
5. Keep it in dry and less dusty place. Temperature should be
within 14 ℉ - 149 ℉ , and avoid direct sunlight.
6. Please full charge the product at least once every six months.
Note
: Please do not keep it in the car, trunk, loading platform
or other hot place under direct sunlight. It may cause the product
failure, degradation or thermal problem.
When not in use,please turn off the output,otherwise the internal
circuit is still in power consumption.
When applying inverters,consumers are requested to use electri-
cal and electronic equipment that is officially certified and
approved.
If the product cannot charge or power other devices, please
check according to following steps:
1. Make sure the power button is turned on.
2. Make sure the AC and DC power buttons are on.
3. Check the battery capacity, if it’s lower than 10%, please
recharge the product as soon as possible.
4. Make sure the load power connected didn’t exceed the limit
power of this product, each port has a limit for the power
connected.
If you can’t solve the trouble after above steps, please contact
the seller from which you bought.
Product Storage and Maintenance
Troubleshooting
15
