12
Electric module
ME 0040/1030/1045/1060
ME 1090/2090/2120/2180
EN
Fig. 2
Heating module ME 0040 / 1045 / 1060 / 1090 /
2090 / 2120 / 2180.
Introduction
Thank you for your trust and selection of a BIAWAR
device. To fully take advantage of this device, please
read this manual before using the equipment, in par-
ticular chapters relating to installation, safety, service
and warranty. Please keep the instructions in a safe
place, for the future reference.
Fig. 1
Heating module ME 1030.
The ME 1030, 0040, 1045, 1060, 1090, 2090, 2120
and 2180 heating modules have been designed
to heat water for the needs of central heating and
domestic hot water installations. It can be installed
in each tank (apart from stainless steel ones) the
structure of which (construction and size) makes it
possible.
The ME 1030, 0040, 1045, 1060, 1090, 2090, 2120
and 2180 heating modules are equipped with a
heating element powered of 3,0; 4,0; 4,5; 6,0; 9,0;
9,0; 12,0; 18,0 kW respectively, a thermostat with
smooth temperature adjustment in the range from
30 up to 75°C, a temperature limiter and a power
cord with a plug.
Use
Symbols
1 General information
IMPORTANT
This symbol informs about the risk to the device or a
person.
IMPORTANT
The module is used to heat water in the reservoir/tank
for the needs of the domestic hot water or the central
heating installations. Any inappropriate and improper
use is prohibited.
CAUTION
This symbol points to important information to be not-
ed when operating the device.
CAUTION
The manufacturer is not liable for damage caused
by failure to comply with this manual or using the
defective device.
ADVICE
This symbol shall mean tips to make product operation
easier.
