Bianco Pumpz BIA-AUTOSUB User Manual
7
9. Maintenance and Cleaning
Under normal operating conditions, the BIANCO AUTOSUB pump does not require any
special maintenance.
Removal of the water pump must be carried out by professionals. In every case, all repairs
and maintenance work must be carried out with the power supply isolated.
When starting the pump, ensure that the inlet filter at the bottom of the pump is installed
correctly to avoid accidental mechanical damage.
Filter and base cleaning
Danger! Risk of electric shock and injury!
Isolate the power supply of the water pump before maintenance and cleaning.
Should the pump ingest sediment it is strongly recommended to flush the pump in clear
water.
1. Use a screwdriver to unscrew the eight screws
④
2. Remove the base
③
from the pump
3. Remove the filter
②
and bracket
①
from the pump
respectively
4. Clean the impurities on the base
③
, filter
②
and bracket
①
5. After cleaning, install the bracket
①
on the water pump
and install the filter
②
and the base
③
in the order of
installation
6. Install the eight screws
④
with a screwdriver
The manufacturer is not responsible for the consequences of any unauthorized repairs
and changes. To ensure safety, the spare parts used for repair must be original parts
provided by the manufacturer or spare parts provided by the manufacturer licensed by
the manufacturer.