A:
9300 Gemini Drive, Beaverton, OR 97008
T:
+1 503.641.7287
W:
www.biamp.com
Table 1 - Power/Systems Status
A multi-color LED provides information about the status of the device
Status
LED Indicator
No power
Off
Booting/Self-Test
Red Solid
Ready to receive configuration or updating firmware
Yellow Solid
Configured and ready to participate in the system
Green Solid
Unit is in Locate mode (triggered from the software)
Green Flashing
Unit has Major Alarm condition
Red Flashing
Unit has Major Minor condition
Yellow Flashing
Unit has both a Major and Minor Alarm condition
Red/Yellow Flashing
Table 2 - Amp LED Indicators
A multi-color LED provides information about the status of the amplifier
(TCM-1A/TCM-XA only)
Status
LED Indicator
No power
Off
Clip detected
Red Solid
Powered
Green Solid
Amplifier limiter engaged
Yellow Solid
Amplifier is in Locate mode (triggered from the software)
Green Flashing
Amplifier has Major Alarm condition
Red Flashing
PoE+ power is not available or insufficient to power the amplifier – it has
been turned off
Red & Yellow Flashing
Table 3 - Microphone LED Indicators
3x multi-color LEDs provide information about the status of the microphone. Default LED indication is
shown in the table below. Default LED behavior may be changed through configuration of the system.
Status
LED Indicator
No power
Off
Configured and operating normally
Green Solid
Unit is in Locate mode (triggered from software)
Green Flashing
Microphone is Muted
Red Solid
Unit has Major Alarm condition
Red Flashing
