Bialetti BREAK CF67S, Instructions For Use Manual

Page: 44 / 124

EN
47
9. Troubleshooting
Problem Cause Solution
The machine will not
heat up.
The machine is not
connected to the mains
power.
Connect the machine to
the mains power.
The machine is not
switched on.
Use the ON/OFF button
to switch on the ma-
chine.
The machine will not
pour co ff ee.
The capsule is stuck or
badly positioned.
Unplug the machine
from the power mains
and wait for it to cool
down; lift the lever and
remove the capsule
manually.
Use a tool, never use
fi ngers.
A capsule may have fall-
en into the machine.
Take out the capsule
compartment and check.
There is no water in the
tank.
Fill the tank with water.
The pipes are clogged
with scale.
Carry out a scale remov-
al cycle.
The co ff ee is cold. The machine has not
completely heated the
water before pouring the
co ff ee.
Before pouring co ff ee,
always wait for the cup
symbol in the top part
of the central switch to
turn green.
The machine is partly
clogged by scale.
Carry out a scale remov-
al cycle.
The machine does not
dispense and the button
light blinks red for 3 s.
A plastic capsule has
been inserted.
Insert an aluminium
capsule and repeat the
dispensing cycle.
The capsule has not
been inserted.
To clean the machine,
start a cleaning cycle by
pressing the pour button
for 5 seconds.