Bialetti 012900010/SC, Instructions For Use Manual

Page: 54 / 144

EN
56
10. Troubleshooting
Problem Cause Solution
It is not possible to
lower the lever.
The capsule is stuck or
badly positioned.
Unplug the machine
from the power mains
and wait for it to cool
down; lift the lever and
remove the capsule
manually. Use a tool,
never use fi ngers.
The compartment of
used capsules is full.
Empty the compartment.
The machine is making
too much noise.
There is no water in the
tank.
Fill the tank with water.
The machine is not
stable on the support
surface.
Make sure it is posi-
tioned on a fl at and rigid
surface.
The capsule falls from its
compartment
The lever is not com-
pletely raised.
Completely lower the
lever and open it until it
gets to its end point.
The machine does not
dispense and both lights
of the pour push buttons
(5-6) blink quickly in
red.
there is a plastic capsule
or the capsule seat is
empty.
Remove the plastic cap-
sule and insert a Bialetti
aluminium capsule. To
clean the machine,
start a cleaning cycle as
previously described.
Make sure no capsule
has been inserted during
this operation.
11. Tips for a good co ff ee
• In order to obtain a thicker and more persistent cream, use cups
with an inner ovoid-shape base.