-7-
-8-
3.Basic Operation
3.1 Battery and Charger
.
Caution
Caution
Please backup the data before resetting the system.
2 Car Mount
The car mount consists of salver and bracket. While using the device in car the device
should be fixed in the proper position of fore-windshield.
3 Micro SD Memory Card
Correctly insert SD/SDHC/MMC card into the slot, and do not remove the
SD/SDHC/MMC card during operation.
1 Reset Key
When the system halted or in the following cases, press reset key to reboot the system:
1. There are delay and stagnation during switch interface;
2. There is no response when click the icons.
3. Power key is unavailable.
3.2 Basic Use
.
1 Power Supply
In-vehicle/portable GPS navigation has two ways of power supply: battery supply and
power supply.
When the device doesn't connect with the adaptor, it is supplied by the lithium battery.
The icon at the top right corner on the main interface of system indicates the
current remaining power.
When the device connects with the adaptor, it is supplied by the outer power.
3.3 Connection with Computer
.
Connect the device with computer by the USB cable. One end connects with PC and
the other end connects with the device.
Tips
Tips
Under normal condition(volume and backlight at 50
), it
can last about some hours after the battery is fully charged. Some
functions need to consume a lot of battery energy, such as
audio/Movie playing, high backlight and Bluetooth, which may
1. Data transmission: There are two new "mobile disk" icons in
my computer
after
the device is successfully connected with computer, the first icon stands for the built-in
flash memory of the device, the second stands for the SD card storage of the device. (If
the SD card is not inserted, the second icon of the disk is unavailable). Then, you can
use them as normal USB flash disk.
4.Hot key
Screen rotate 180 degree.
Enter to screen saver, click to screen and
then return to window.
Enter to setting interface.
Enter to Bluetooth setting.
Change from internal speaker to external
speaker.
Caution
Caution
1. Please do not delete and revise the data in the built-in
flash memory of the device, in case some functions of the device are
out of work. 2. Based on Windows 98 operation system, please install
the driver before operating the device. The operation of communication
between GPS and computer are exampled based on the Windows 98
operation system or above version. 3.When GPS is connecting with
computer by USB line, it can not operate the current functions.
2.Safely Remove: Please remove the USB line after finishing the data transmission (just
operate it as the USB flash disk).
