Operation
The ATT2 unit simply fits between the extension speaker socket of your radio (high level
audio source) and your bhi ParaPro EQ20/EQ20-DSP unit or audio equipment.
Connect from the extension speaker socket of your radio or audio source to the input
socket on the ATT2 unit using a 3.5mm mono or stereo jack plug lead. Connect the
output lead of the ATT2 unit to you bhi ParaPro EQ20/EQ20-DSP unit or audio
equipment.
Specification
Input Impedance:
11 Ohms
Output Impedance:
10 k Ohm
Maximum Input Power: 2 Watts
Output level: Line level 1 Volt P-P into 10 k Ohm (Varies depending on the source
drive impedance)
Input Connection:
1 x stereo 3.5mm Jack socket (will accept a 3.5mm mono plug lead
from a standard 4 Ohm or 8 Ohm extension speaker socket)
Output Connection: 1 x integral stereo 3.5mm Jack plug lead 0.5m long
WEEE Statement
Weee Statement for correct disposal of this product: (Applicable in the European
Union and other European countries with separate collection systems). This marking
shown on the product or its literature, indicates that it should not be disposed of with
other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling. Business users should contact
their supplier and check the terms and conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.
bhi
bhi Ltd, PO Box 318, Burgess Hill, RH15 9NR England.
Tel: +44 (0)1444 870333
– Email: [email protected] – Web: www.bhi-ltd.com
