A E R O L I G H T
2 0 2 3
BH
5
B H P 0 1 E B 2 3 0 5 6 1 8 7
S E R I A L N U M B E R
S U B M I T T I N G A WA R R A N T Y C L A I M
All warranty claims must be channelled through an official BH dealer. The dealer will analyse the claim to identify its
scope and perform a preliminary assessment of the incident. The dealer will submit and process the claim directly
with BH. Once BH has defined the corrective measures required, the dealer will send this information to the customer.
All claims must be processed by the official dealer from which you purchased your bicycle. If this is not possible,
please contact us directly. We will help you find an authorised dealer near you:
https://www.bhbikes.com/es_INT/quienes-somos/contacto
R E G I S T E R I N G T H E L I F E T I M E F R A M E WA R R A N T Y
You must register the bicycle within 30 days of purchase to enjoy the BH BIKES extended warranty. Follow the steps
below to activate the LIFETIME FRAME extended warranty:
•
LIFETIME FRAME WARRANTY
You must register the bicycle on the BH BIKES website to enjoy the LIFETIME FRAME extended warranty:
https://www.bhbikes.com/es_INT/registro-garantia-vida-bh/registra-tu-bici-garantia-de-por-vida
Watch this video to find out what you need to do:
The serial number required to register the bicycle is located on the bottom of the bicycle, on the seat tube,
above the bottom bracket:
0 2
B H W A R R A N T Y
https://youtu.be/47aLVgUI248
This user manual contains important information for
AEROLIGHT (LD603 / LD653 / LD703 / LD753)
. Please read the
entire manual carefully. The user manuals of all BH models can be consulted on the website at the following address:
https://www.bhbikes.com/manuals
This document contains additional information to the general user manual, available at:
https://www.bhbikes.com/manuals
You can check the characteristics and recommendations of third-party parts on their corresponding official websites.
03
M A I N T E N A N C E
I N S P E CT T H E B I C Y C L E B E F O R E U S E
Bicycles are inspected several times throughout the manufacturing process and then at the BH workshop during the
final check. As the bicycle's operation may be affected during transport or third parties may have modified the bicycle
before its sale, the following must be checked before each trip:
•
FRAME:
no cracks, damage or strange noises.
•
CHAIN:
it must be lubricated and the transmission system must not make any strange noises.
•
BRAKES:
the brakes must be working properly. When stopped, press the brake lever with enough strength and
check that it does not touch the handlebars.
•
TYRES:
the pressure must be correct and there must be no cuts on the tread or on the sides. Also check that
the wear level does not exceed the maximum recommended level.
•
WHEELS:
the wheels must rotate freely in order to check how they rotate. Also check the space between the
brake lining and the rim, as well as the space between the frame and tyre.
•
STEERING:
the steering must turn smoothly and with no strange noises.
•
SWINGARM ROTATION POINTS:
when weight is exerted on the bicycle, the suspension must work as expected
and with no strange noises. If it is not working properly or there is play between the moving parts, this might
mean that the tightening torques are incorrect or that the bearings are worn.
•
BEARINGS:
the bearings must work properly and with no strange noises. The bearings are subject to wear and
must be replaced to prevent damage to the components on which they are installed.
•
ELECTRICAL SYSTEM:
if the bicycle features an electrical system, check that it is functioning properly
by ensuring that the electrical assistance mode is running and that all parts are functioning properly (motor,
display, change of assistance mode and speed sensor). If there is no electrical assistance, check that all
connections are correct and show no signs of damage.
