M1200
29
►
Step 3:
Fitting the left armrest.-
Fig.4
Remove the screw and washer (Fig.K)
from the top shaft protruding from the
chair, Fig.4.
Fig.5
Press the
Arm open
button on the remote
control, Fig.5, to bring
the arm adjustment shaft
out to its maximum
position,
Fig.L,
see
Fig.4.
Take the knobs and outer flat washers Fig.N off the armrest, Fig.4.
Fit the lefthand armrest by slotting it onto the shaft on the chair, Fig.K1,
then replace the screw and the washers removed previously and tighten.
Next, bring the armrest back in toward the chair, insert the coupling pin in
through the motor shaft, Fig.L1.
Fit the arm motor fastening shaft Fig.b and insert the cotter pin Fig.a.
Press the
Arm close
button on the remote control to bring the arm
adjustment shaft in and be able to insert the armrest shafts, Fig.N, into the
holes on the chair, Fig.4. Replace the flat washers and knobs removed
previously and tighten.
►
Step 4:
Fitting the right armrest.-
To fit the righthand armrest, follow the same assembly procedure as done with the lefthand
armrest.
IMPORTANT:
Press the Start/Stop
button on the remote control, press the ON/OFF switch, Fig.2 and
remove the plug from the wall socket to proceed with the chair assembly.
