BH FITNESS RS6i, Owner'S Manual

Page: 14 / 30

14
STEP 3: FRONT AND REAR MAIN FRAME ASSEMBLY
Connect the Rear Hand Pulse Sensor Wire (A3) to Middle Hand
Pulse Sensor Wire (A4). Slide the Front (A1) and the Rear (A2)
Main Frames onto each other and secure the joint with 6 Screws
(N1), 6 Spring Washers (N2) and 6 Flat Washers (N3). Make sure
not to pinch the cables.
STEP 4: CENTER SUPPORT ASSEMBLY
Slide the Tube Cover (I) onto the Main
Support Tube (D).
Connect Motor Sensor Wire (A35) coming
from Front Main Frame (A1) to Sensor Wire
(A33) from the Main Support Tube (D).
Connect Sensor Wire (A34) coming from
Main Support Tube (D) to the Middle Hand
Pulse Sensor Wire (A4) from the Front Main
Frame (A1).
Secure Main Support Tube (D) to Front
Main Frame (A1) using 3 Bolts (N7), 3
Spring Washers (N2) and 3 Flat Washers
(N3). Slide Tube Cover (I) down until it
covers the joint completely.
ATTENTION: TAKE CARE NOT TO
PINCH THE CABLES DURING THE
ASSEMBLY.
A35