14
STEP 2
(this step will require two people)
Attach the Left Upright (C) onto Frame (B). Then attach the control wire (located on
the right of the motor shroud) to the guide wire coming out of the bottom of the Right
Upright (D). Then pull the guide wire (that is attached to the control wire) through the
Right Upright (D) and out the top with the control wire. Be careful not to damage the
wires. Then attach the Right Upright (D) to the Frame with Screws (b) and do tighten.
Insert the Screws (d), Spring Washer (f) and Washer(e) but do not tighten.
Guide Wire
Control Wire
