18
STEP 6
Caution: For safety, the following assembly will require two people.
Remove the four screws (36) and only loosen the Socket Set Screws (53) from the two Guide Rods
(19). Have one person pull the two Guide Rods (19) away from the Left Frame (1) so as to allow room
to install the 15 lb Weight Plates (77). Next install the 10 lb Weight Plates (31). Next install the 5 lb
Weight Plates (76). Install the Cast Weight Bushings (32). Insert the 21 Hole Stem (28) through the
center hole of the Cast Top Weight (29) and fasten using two Roll Pins (27). Instal the two Guide Rod
bushings (30) and fasten the Adjustable Pulley Mount Assembly (9) using nut (71). Insert the 21 Hole
Stem (28) assembly through the center hole of all the stacked weights. Apply the Number Labels (43).
The Weight Selector Pin Assembly (26) is used to lock the amount of weight desired for each exercise.
Use the same assembly instuctions as above for the Right Frame (2).
Summary of Contents for Dual Adjustable Pulley
Page 12: ...12 ASSEMBLY INSTRUCTIONS...
Page 21: ...21 STEP 9 Tighten hardware with wrench...
Page 25: ...25 EXPLODED VIEW DRAWING...
Page 26: ...26 EXPLODED VIEW DRAWING...