BH FITNESS BT7535 Manual Download Page 3

Page: 3 / 11

CHANGING FROM KILOMETRES
TO MILES.-

This machine has the option to display
speed in km/h or mph.

The factory setting for the machine is
km/h. To change from km/h to mph
follow these steps:

Remove the safety key.

Press  and  hold  the  PROGRAM  and
MODE  keys  at  the  same  time  for  5
approximately  seconds.  The  speed
display    “M”  corresponds  to  miles  per
hour and insert the safety  key  into its
slot.

OPERATING INSTRUCTIONS.-

MANUAL MODE

This  monitor  has  program  (MANUAL).
For  programs  MANUAL  you  can
specify  the  duration  of  the  exercise
between  (5  to  99)  minutes,  distance
between  (1  to  99.9)  and  calories
between (5 to 999).

Pressing  the  START/STOP  key  will
light  the  MANUAL  and  the  machine
will start within 3 seconds, shown by a
countdown  on  the  TIME  display,  at  a
speed of 1.0km/h.

You  can  increase  or  decrease  the
speed  setting  in  MANUAL  mode  by
pressing  the  SPEED  (+  -)  keys,
between 1.0

–18 km/h.

The machine will stop if you press the
START/STOP key or if you remove
the SAFETY KEY.

Time will be reseted if you press the
MODE key for more than 5 seconds.

PROGRAM MODE.-

This

monitor

has

programs

(MANUAL,PROGRAM

[

P01

P36

USE

[

U01

U03

]

; HRC; BODY-FAT).

For programs P1 to P36 you can
specify the duration of the exercise
between (5 to 99) minutes.

Program graphics for P1 to P36.

See7-9 pages.-

With  the  machine  ready,  press  the
PROGRAM  key  and  P01  will  appear
on  the  display,  by  pressing  the
PROGRAM  key  you  can  access  the
programs  (P1  al  P36:  BODY-FAT),
and the word TIME will begin to flash.

Use the SPEED (+ -) keys to specify
the duration of the program (5

– 99

minutes). The monitor has a default
program setting of 30 minutes.

Press  the  START/STOP  key  and  the
machine  will  start  to  operate  after  3
seconds, shown by the countdown  on
the  central  display,  based  on  the
values it has been given.

You can change the speed settings at
any time during the exercise by
pressing the SPEED (+ -) keys, and
the inclination settings by pressing the
INCLINE

▲▼

keys.

ECO FUNCTION.-

Press  this  button  when  in  manual  or
program mode  to enter  into  economic
mode.  The  machine  will  change  the
incline  and  configuration  to  reduce
power  consumption  and  the  time
window  will  alternate  time  with  the
word ECO.

Press the ECO button again to exit
this function.

USER PROGRAM MODE.-

The user programs allow you to design
the speed and inclination graphs with
reference to your fitness level.