8
Strictly perform installation, set-up, maintenance, cleaning
and transport with the motor switched off and the blade firmly
secured against accidental operati¬on. Immediately discon-
nect power off in case of any eventual fault or trouble.
The user shall comply with these operation, set-up, maintenance, re-
pair and trouble shooting instructions in order to assure safe operation
and no damages to the equipment. Moreover we recommend letting the
machine be run only and strictly by trained and skilled staff that must
be familiar with the applicable occupational safety and health adminis-
tration rules as well as applicable transportation rules.
Machine instability can result in injury or severe damages.
To ensure stability during operation make sure to choose a flat, dry
floor free from any tall grass, brush or other interferences.
The working area around the machine must be kept as clear as possib-
le from surrounding obstacles and slippery foundation floors should be
duly treated (do not use saw dust or wood ash for this purpose). Make
sure that the equipment stands on a safe stable foundation.
4.1 General safety rules
Following precautions must be taken at all times:
● Only skilled competent persons may be assigned to operate the ma-
chine. No one under the age of 18 should be allowed to operate the
log splitter.
● Do not allow within the hazardous zone any unauthorized thirds or
persons who are not familiar with the dangers related to use and ope-
ration of the machine and do not perform uncompliant use of the ma-
chine. REMEMBER: the operator is responsible for safety of all nearby
thirds on site.
● Operators must wear steel toe safety shoes and snug-fitting tear-re-
sistant work cloths.
● Operators must wear hearing protection, safety glasses, safety
shoes, helmets, gloves and other adequate protection means.
● Wear protective hair covering to contain long hair during operation.
● Always comply with these instructions when your start/operate the
machine.
• NEVER leave the machine unattended with the running motor.
Before switching power on and putting the winch to work make sure
that there are no bystanders in the dangerous area and that you have
good and clear visibility on the work area.
4. SAFETY
