BGU HRZ FIX Euro/Kombi, User Manual, Page: 9 / 32

9
• Do not allow anybody on the loader during loading or travel opera-
tions!
• Connect the equipment in compliance to these instructions and the
applicable provisions!
• Work defensively. Think ahead and anticipate hazards. Take special care
in connecting/disconnecting eventual attachments to/from the tractor!
• Always have the unit firmly stand on the special outriggers when
performing mounting/dismounting works on the machine! (safety
and stability)
• Never overload a machine. Carry a load that is safe, within the capacity
of the machine, and suitably secured in the special fixation points on the
machine!
• Always comply with the admissible axis loads and transport
dimensions/clearance!
• Provide and check the functionality of all transport facilities as for instance
illumination, warning tools and devices, safeties and protections!
• The disconnectors of the quick-action couplings must hang loose.
Avoid self-disconnection in the lower section!
• Never leave the operator‘s stand during travel!
• Travel, steering and braking performance are affected by the use of
hanging ballast on the machine. Always keep at safe distance for
steering and braking!
• When taking turns please mind for both the outreach and/or rotating
mass of the equipment!
• Make sure that all safeties and protections are duly in place and
operating before starting to use your equipment!
• Strictly start log loading operations when all workers are clear of
the area!
• Keep the turning/slewing area of the equipment clear from any obstacle!
• Make sure that no persons and no obstacles are within the slew range
before operating any of the hydraulic folding frames.
• BEWARE of pinch hands danger on all moving parts (for instance
hydraulic attachments)!
• Always keep at safe distance from any manually folding/flapping
attachments!
• Before leaving the tractor, make sure to lower the grapple down on
ground, switch the engine off and remove the keys from the ignition!
• Make sure that no persons stand in the dangerous zone between
the tractor and the trailer unless due measures were taken to prevent
the vehicle from rolling away (for example engaging the parking
brakes and using additional wheel chocks for increased safe)!
• Folded frames and telescoping hoisting devices must be duly
secured in the transport position!