SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8703
Vacuum Dent Puller Kit
with Hand Pump
GENERAL INFORMATION
The dent puller kit serves for the repair of large dents and, due to the hand pump, it is independent of
compressed air systems.
CONTENTS
Basic unit with slide hammer and hand pump
3 changeable suction heads, Ø 70 mm, Ø 100 mm, Ø 125 mm
SAFETY INSTRUCTIONS
Use the device in a suitable working space. Keep the area free from unused materials and tools.
Provide for sufficient lighting.
Check the device for proper functioning every time you want to use it. Immediately replace
defective or worn components.
When you use this body hammer always wear appropriate safety goggles (or a face protection) as
well as protective gloves.
Take off all loose clothing, ties, wrist watches, rings and any other loose jewelry before you start
your work and tie up or contain long hair.
Wear adequate working clothes and keep hands and body away from moving components.
Make sure for a safe foothold. Do not lean over too much. Make sure that the floor is not slippery
and wear slip-resistant safety shoes.
Keep children and unauthorized persons away from the workplace.
Secure the work piece before you use the body hammer.
