BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9694
Engine Timing Tool Set
for Land Rover 3.6 TD V8
TOOLS
A/B
Camshaft Alignment Tool (x2),
with Fixing Screws (F),
to be used as OEM 303-1236
C
Flywheel Locking Tool,
to be used as OEM 303-1243
D
Crankshaft Timing Pin,
to be used as OEM 303-1238
E
Camshaft Rotating Pin,
to be used as OEM 303-1239
INTENDED USE
This tool set is made for setting the camshaft and crankshaft timing when e.g. replacing timing chain
or cylinder head gasket and it is suitable for:
Range Rover 3.6 TD V8 (2006-2011), engine codes: 368DT
Range Rover Sport 3.6 TD V8 (2006-2011), engine codes: 368DT
More information regarding this item and a list of suitable engines and models can be found on our
website:
SAFETY INFORMATION
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
C
F
A
D
B
04
A
E
F
01
02
03
B
