BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
INSTALLING BATTERIES
Lift the two tabs of headband holder out of the two pin
of the lamp and remove the holder.
Lift the flap (marked with "Open") from the lock and remove the cover.
Insert 3x AAA 1.5V batteries into the battery compartment,
pay attention to correct polarity.
Mount the headlight in reverse order.
OPERATING
Adjust the headband to the desired length.
The light direction can be adjusted
by moving up or down the LED lamp casing.
Max adjustment angle is 60 degrees.
FUNCTIONS
The on/off button is located on the headlamp.
Activate the individual functions of the headlamp by operating the switch:
Push power button once; LED lights with 100% brightness
Push power button twice, LED lights with 50% brightness (energy saving)
Push power button three times; LED flashes
Push power button four times; LED turns off
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and disposed
of in a manner which is compatible with the environment.
DISPOSAL
Do not dispose battery in household waste. Batteries should be disposed of in a
responsible manner, they must be disposed at appropriate collection point.
Dispose of this product at the end of its working life in compliance with the EU Directive
on Waste Electrical and Electronic Equipment. Contact your local solid waste authority
for recycling information or give the product for disposal to BGS technic KG or to an
electrical appliances retailer
.
